Eolis 3D Wirefree RTS

Eolis Wirefree RTS wind sensor

Essential wind protection for articulating arm patio awnings.
Automatic radio-controlled operation (based on wind load) for articulating arm awnings.

The Eolis 3D WireFree RTS constantly measures the oscillations of the awning caused by the wind. If the set threshold value is exceeded, the awning is retracted for safety reasons.
In this state, any manual or automatic movement command is blocked. If the set threshold value is not reached, an additional solar detector is triggered after 12 minutes.
Manual control is available again after 30 seconds.
For use with Somfy radio motors and radio receivers.

Advantages:

• Reliable protection of the awning thanks to electronic wind load detection in three directions (3D effect)
• No cables required thanks to battery power supply
• Programming and mounting on the front profile in just a few minutes
• Simple adjustment thanks to the selection of a predefined threshold value for oscillations or the specification of a manual oscillation
• “Auto on/off” function for programming and changing batteries. The sensor is only active in the mount
• Low battery warning sent by the motor
• Available in three colors: white, black, ultra-light bronze (off-white)

Technical data:

Operating voltage: 2 x 1.5 V DC
(AAA battery, not rechargeable)
Operating temperature: -20 °C to +60 °C
Protection rating: IP 44
Radio frequency: 433.42 MHz
Threshold setting: 9 sensitivity levels Factory setting: threshold value 2
Dimensions (W x H x D): 153 x 25 x 38 mm

Delivery time: 5 to 10 days